Lost Password :: Posting Pictures :: Who's Online :: Stats :: Memberlist :: Top Posters :: Search
:: :: A Cheap Motor Mount For Your Highbanker
Unsubscribe From Newsletter



Welcome, Register :: Log In Welcome to our newest member, Agent67.
Users active in this forum:
Users active in this thread:

people online in the last 1 minutes - 0 members, 0 anon and 0 guests. (Most ever was 29 at 13:36:32 Sat Aug 3 2002)

Pages: [ 1 ]

[ Notify of replies made to this post ][ Print ][ Send To Friend ] [ Watch ] [ < ] [ Add Reply ] [ > ]

MarshallAk
03:51:46 Sun
Apr 24 2011

Offline
879 posts
Reply
A Cheap Motor Mount For Your Highbanker

I needed a way to mount my little Honda 2.5hp pump for a homemade highbanker. Just setting the motor on the riverbank wouldn't do...it would vibrate itself down into the water every time, or tip over.
Hmmm...there was this used little 12" tire in my backyard...

First, I cut some 1" holes in the sidewall on the "bottem". (so water would drain out quickly, and not down the side of my pants while lugging it back to my truck at the end of the day)



Then...I mounted a 12" X 12" aluminum plate on the "top" of the tire, and installed the pump with some bolts.



Only cost a few dollars for the hardware, and the pump no longer walks down the riverbank. Total weight, including tire: 30.6 lbs.

Marshall

  
tenderfootminer
08:35:46 Sun
Apr 24 2011

Offline
605 posts

Reply
Re: A Cheap Motor Mount For Your Highbanker

Marshal good fix! I am such a slow learner I blew up two pumps from them "tippingover"before i mounted them to a base:smile: happy Easter ...ws
[1 edits; Last edit by tenderfootminer at 08:36:22 Sun Apr 24 2011]

  
JOE_S_INDY
14:12:24 Sun
Apr 24 2011

Offline
1384 posts

Reply
Re: A Cheap Motor Mount For Your Highbanker

Good idea, Marshall!

Here is another one for the "Garden Hose Port" on that Keene pump.

At a hardware store buy a plastic (or DELUX metal) garden hose "Y" with two ball valves built into the two discharges. Very inexpensive.

Then find an old garden hose and cut a 6 foot chunk out of it (best to include the factory female assembly end).

In Walmart (or other stores with a "Boat Supplies" section) find a cheap, plastic, hand operated bilge pump / air pump. Usually red and about $10. Find the kind that is a simple tube with two ports (an innie and an outie) for either water or air. Slip the cut off end of your hose over the "Innie" port and screw the female garden hose end to one of the "Y" ports. Replace the female end of the cut garden hose (with a spray nozzle on the male end) and screw the end with the replacement female end to the other "Y" port. Close both ball valves for now.

To prime that pump all you need to do is open just the ball valve to the short hose segment (going to the hand pump), step on the lay flat hose for a moment (to seal it off) and pump the air out of the Keene pump. The outgoing air is replaced by water from the Keene pump's intake hose. When you start discharging water from the hand pump close off the ball valve going to it.

The pump is primed and ready to go! :smile:

For sluice cleanup, shut off the water valve to the highbanker, keep the engine running at idle and open the ball valve to the garden hose with the spray nozzle on it. Use that hose to wash down the highbanker and provide spray water for classifying and panning.

I have the exact pump that you have and it works VERY well for me. :smile:

Joe
[1 edits; Last edit by JOE_S_INDY at 18:36:01 Tue Apr 26 2011]



---
Wiser Mining Through Endless Personal Mistakes
 
 
faaus
14:45:46 Tue
Apr 26 2011

Offline
87 posts
Reply
Re: A Cheap Motor Mount For Your Highbanker

Thank you both for TWO great tips.

  

Pages: [ 1 ]

[ Notify of replies made to this post ][ Print ][ Send To Friend ] [ Watch ] [ < ] [ Add Reply ] [ > ]

 Total Members: 11956

  • Can start a new thread. (Everyone)
  • Can't start a new poll. (Mods & Admins)
  • Can add a reply. (Everyone)
  • Can't edit your posts.(Everyone Registered)
  • Register :: Log In :: Administrators

    The time is now 04:19:59 Sat Jul 2 2022

    Powered By BbBoard V1.4.2
    © 2001-2007 BbBoy.net
    :: :: A Cheap Motor Mount For Your Highbanker

    [Most Recent Quotes from www.kitco.com]

    [Most Recent Quotes from www.kitco.com]