adjustment for better velocity
http://bb.bbboy.net/straferbbmachinegunownersgroup-viewthread?forum=10&thread=37
Powered By BbBoard - http://bb.bbboy.net

pt460
17:43:25 Mon
Mar 8 2004
adjustment for better velocity
Has anyone here actually experimented with the velocity/air adustment behind that plastic cap? Rumor has it that the velocity can be increased significantly by turning it all the way up... 30 rnds per C02. But that is just rumor. I've not actually seen a definitive post from someone that has actually done it. Just obscure "Wow!" posts, which do not tell me much.
Anyone tried this and chrono'd the results?

MikeSmith
18:35:48 Mon
Mar 8 2004
Re: adjustment for better velocity
I've made the adjustment. It WORKS. there is no comparison between the way the gun shoots when you get it out the boxd and how it shoots when turned all the way up. I've been using Daisy steel ABBs in it lately and they are coming out hard and fast. I don't have a chrony but the power is certainly there. Oh by the way there is a recoil to it after turning the power all the way up too so don't put your face too close to the iron sights

Mike
SEARAT1
19:44:24 Mon
Mar 8 2004
Re: adjustment for better velocity
Don't be too sure...... Look at my next post!!!!
deuce217
06:01:09 Sat
Sep 10 2011
Re: adjustment for better velocity *every one needs to see this*
I dug this up from the beginning of time on this site... Look how far we have come. Keep up the good work!
netstamp
14:24:57 Sat
Sep 10 2011
Re: adjustment for better velocity
Can you explain the adjustment ? Plastic cap ? Thanks in advance.
rkr
07:52:37 Sun
Sep 11 2011
Re: adjustment for better velocity
It's the pot adjustment. Might have been capped in older drozds. In BB you need to drill the plastic open to gain access.
netstamp
09:17:50 Sun
Sep 11 2011
Re: adjustment for better velocity
Thanks
DUBB
21:08:45 Sun
Sep 11 2011
Re: adjustment for better velocity
This will adjust the solenoid dwell time, in microseconds. This is the time that the solenoid will "dwell" or keep the valve open during each shot. This will obviously determine how much gas is released, and in turn, have a direct effect on the velocity and gas consumption. Sergey puts a button on his boards so that you change this setting on the fly, as well as have a read out for what the setting is, exactly, as opposed to guessing with the pot on the original boards. That pot isn't made to mess with very much, it will disintegrate after enough adjusting.
SONYtec
04:51:27 Mon
Sep 12 2011
Re: adjustment for better velocity
Quote: DUBB at 21:08:45 Sun Sep 11 2011

This will adjust the solenoid dwell time, in microseconds. This is the time that the solenoid will "dwell" or keep the valve open during each shot. This will obviously determine how much gas is released, and in turn, have a direct effect on the velocity and gas consumption. Sergey puts a button on his boards so that you change this setting on the fly, as well as have a read out for what the setting is, exactly, as opposed to guessing with the pot on the original boards. That pot isn't made to mess with very much, it will disintegrate after enough adjusting.


Correct, on all of the above.


adjustment for better velocity
http://bb.bbboy.net/straferbbmachinegunownersgroup-viewthread?forum=10&thread=37
Powered By BbBoard - http://bb.bbboy.net