walther ppk "runaway firing" solution?
http://bb.bbboy.net/straferbbmachinegunownersgroup-viewthread?forum=5&thread=74
Powered By BbBoard - http://bb.bbboy.net

jjmm4Ljj
04:39:37 Sun
Aug 8 2010
walther ppk "runaway firing" solution?
First off I would like to add that I modded my ppk by adding washers to the firing pin only. this way fires fully automatic also .sometimes I can get some burst rounds out of it and sometimes this gun does "runaway firing" emtying the whole magazine in one trigger pull and I am asking any thoughts you may have to solve this. thank you for any helpings:smile:
Tbkahuna
17:46:31 Thu
Aug 12 2010
Re: walther ppk "runaway firing" solution?
It sounds like it isn't reaching the fully cocked position. It will do that when you run low on CO2 or it gets cold from several bursts and the pressure is down. It doesn't have enough pressure to fully recock, so the slide starts back forward where the fixed firing pin hits the valve and it fires again.

I want to use HPA with an adapter and a higher capacity magazine.

TBK
delysid
22:20:02 Thu
Aug 12 2010
Re: walther ppk "runaway firing" solution?
i noticed this runaway problem when i first converted my ppk, this is how i delt with it. bought 12 more magazines, now 13 shots of 13 rounds each. using bulk air this gun works better.


walther ppk "runaway firing" solution?
http://bb.bbboy.net/straferbbmachinegunownersgroup-viewthread?forum=5&thread=74
Powered By BbBoard - http://bb.bbboy.net