Full auto mod umarex steel storm
http://bb.bbboy.net/straferbbmachinegunownersgroup-viewthread?forum=5&thread=77
Powered By BbBoard - http://bb.bbboy.net

mvonbeamer
05:28:26 Thu
Aug 26 2010
Full auto mod umarex steel storm
I was hoping somone out there has done the full auto mode. I started using the you tube video and got lost. Anyone have clear photos of what should be removed and how the both catch or sear should look when done correctly. Any help would be appreciated. Took it apart several times and just can seem to put it back together right.

thanks

Major_Malfunction
04:26:09 Sun
Aug 29 2010
Re: Full auto mod umarex steel storm
Responded in email. Posting this for others who may be having doubts.

These are all the parts I removed





Then, and this is key... The collapsible black plastic tube's largest section must be slid over the main action spring's guide (thick metal disc with rod sticking out the center on which the main spring is seated) and be sitting snugly against the back walls of the metal casing.

Failure to do this results on a case that crushes agains the tube and causes the action to jam badly. (ask me how I know...)


Also, might be worth mentioning for first time case splitters I don't have pictures of this but to get it appart, you have to pull back the hammer or it holds the halves together at the front of the assembly.



mvonbeamer
21:00:09 Sun
Aug 29 2010
Re: Full auto mod umarex steel storm
Just wanted to thanks Major_malfunction for his help. It turns out that near the sear is a presure spring that need to be attached. When i took this thing apart, everything just kind of fell apart. The mod is easy but time consuming because there are alot of parts including small springs. I put it back correctly the first time but the spring was in the wrong position.

Thank god major malfunction sent the photos of the items that needed to be removed. For a while there i though i might have lost some pieces. If you do the mod, be aware some of those tiny springs will fly 15' if not taken apart correctly. wana guess how i found that out.

Hey MM thanks again for the help.

ruda911
06:30:25 Tue
Jan 11 2011
Re: Full auto mod umarex steel storm
i did this mod to not as easy as you think do your reserch before taking this on trust me ran into many problems

jct842
23:19:31 Tue
Jan 11 2011
Re: Full auto mod umarex steel storm
I will not make the full auto mod on mine unless I go to hpa. umarex knew what they were doing with the co2. shoot a few bursts in a row and you have no power due to the co2 going cold. now adding some barrel is going to happen, that is worth while. John



Full auto mod umarex steel storm
http://bb.bbboy.net/straferbbmachinegunownersgroup-viewthread?forum=5&thread=77
Powered By BbBoard - http://bb.bbboy.net