| Welcome, Register :: Log In | Welcome to our newest member, pirellip. | |
| Users active in this forum: | ||
| Users active in this thread: | ||
|
people online in the last 60 minutes - 0 members, 0 anon and 0 guests. (Most ever was 187 at 11:29:16 Fri Mar 5 2021) |
| Pages: [ 1 ] |
| [ Notify ] | [ Print ] | [ Send To Friend ] | [ Watch ] | [ < ] [ > ] |
|
xrayed 20:57:13 Sun Feb 1 2004 Offline 5 posts BBMG Private Reply |
You have to unscrew the collet holding the solenoid (not motor) in place and also take out the screw in the frame just above it. There should be just enough slack to pull the solenoid to the rear and out.
If I do it again I will remove the wires at the solenoid and re-solder them upon reassembly. It would make it easier to unscrew the collet piece. | ||||
| Mood: |
|
graveworks 17:22:50 Thu Jan 29 2004 Offline 1 posts Reply |
I'm trying to take apart my Drozd to make some of the modifications discussed on this board, but I'm having some trouble. It seems like the wires from the motor to the battery compartment are too short to allow me to take it apart completely. Anybody else have this problem? Any suggestions? Thanks.
| ||||
| Mood: |
| Pages: [ 1 ] |
| [ Notify ] | [ Print ] | [ Send To Friend ] | [ Watch ] | [ < ] [ > ] |
|
| Register :: Log In The time is now 00:36:49 Thu Jul 7 2022 |