| Who's Online | Stats | Memberlist | Top Posters | Search | Lost Password |
| Welcome, Register :: Log In | Welcome to our newest member, surreysinner. | |
| Users active in this forum: green_dots | ||
| Users active in this thread: Guest | ||
|
18 people online in the last 60 minutes - 1 members, 0 anon and 17 guests. (Most ever was 121 at 02:27:28 Wed Oct 19 2011) green_dots |
| Pages: [ 1 ] |
| [ Notify ] | [ Print ] | [ Send To Friend ] | [ Watch ] | [ < ] [ > ] |
Tbkahuna  03:04:25 Tue Aug 21 2012 Offline 1671 posts BBMG MASTER BLASTER +1000  Reply |
The rotor is what moves the bbs. I'll try to post pictures of the rotors I have designed. I put a chamfer on the gear teeth to help with that.
The airsoft mags have a good design to minimize space by having the spring inside the gear. That makes it not so easy to make a replacement with a stronger spring. TBK | ||||
| Mood: |
|
green_dots 02:01:41 Tue Aug 21 2012 Online 2392 posts BBMG LIFE BLASTER +2000 Reply |
If the rotor starts slipping.Does itnot get to the place where it will lock down and start moving the bbs again.Do we really need the rotor?I take it it is some type of safety device so you don't exploded the mag. GD.
| ||||
| Mood: |
|
green_dots 01:12:14 Tue Aug 21 2012 Online 2392 posts BBMG LIFE BLASTER +2000 Reply |
We'll 1 hour has gone by trying to send pictures.This is a new computer so everything is new or losted.What is a matter with photobucket.It won't go to login, instead it tries to get me to buy something.I took 2 pictures and tried to find them on my computer.When I did, the folders were empty.This is the reason I so seldom sent pictures and usually it through Sergey.You are right cam about not reading completely your postings on your attempt to get the rotor type mag operating. GD.
| ||||
| Mood: |
radical  23:04:33 Mon Aug 20 2012 Offline 5156 posts BBMG LIFER  Reply |
Like I said before. If you don't want to post pics then email them to me GD. Id be glad to. Still essential to learn how we do it. We're missing out on some of you good ideas.
| ||||
| Mood: |
camracer  22:35:11 Mon Aug 20 2012 Offline 4933 posts BBMG LIFE BLASTER +2000  Reply |
GD, You really, Really, REALLY need to study my prototype thread again!! I went through ALL of your problems already! Still a shame you will not learn to post photos of your experimentation!!!! Really could help you if you could do that!
Read through this thread again: http://bb.bbboy.net/straferbbmachinegunownersgroup-viewthread?forum=10&thread=2953 I'll bump this up.
| |||||
| Mood: | Mood Now:  ( Rocking ) Post Mood: ( Rocking ) |
|
green_dots 20:42:04 Mon Aug 20 2012 Online 2392 posts BBMG LIFE BLASTER +2000 Reply |
Maybe (got to wait for the glue to dry) a major breakthrough in getting the rotor to cycle properly. Here's the problem with the rotor trying to cycle 4.5mm instead of 6mm.It has two parts. The 4.5mm bbs as they cycle.They are fine to they get to where they need to leave the rotor.Because the 4.5 is way shorter or smaller diameter the pin on the rotor loses contact TOO SOON. Many times it will slide over the pin in the rotor and end up pn the top of the rotor or much more important cause a JAM.My ayyack on this problem is two fold. First I drilled a very small hole very close to where the pin on the rotor as just reach it's highest point. I put avery small piece of toothpick through it.This helps somewhat keeping the bbs on course.Now the important part.How do I get the steel bb which is smaller in diameter to stay longer in contact with the point of the rotor. My answer is to MOVE UP the floor of the rotor housing.Put a small nylon tie down in, so the bbs are now much closer to the pin of the rotor and in contact longer.IT WORKS.No more jams.I have to wait a day for the glue to dry but I think it will solve jam issues.There is also a small tie helping the bbs to feed into 4.6-4.7 tubing.It is tight.I have been studing this for the past 2 weeks and spilling bbs everywhere but I think I have made a BREAKTHROUGH. GD.
| ||||
| Mood: |
|
green_dots 03:33:10 Mon Aug 20 2012 Online 2392 posts BBMG LIFE BLASTER +2000 Reply |
I've got his PM.He is 20 years old from Finland and a huge modder.I am trying to get him over to the dark side. GD.
| ||||
| Mood: |
|
radical 18:46:12 Sun Aug 19 2012 Offline 5156 posts BBMG LIFER Reply |
Great site!
| ||||
| Mood: |
|
camracer 13:51:55 Sun Aug 19 2012 Offline 4933 posts BBMG LIFE BLASTER +2000 Reply |
Yep, that's what we need to do! Simple enough!
---Cam
| |||||
| Mood: | Mood Now: ( Rocking ) Post Mood: ( Rocking ) |
|
green_dots 01:44:55 Sun Aug 19 2012 Online 2392 posts BBMG LIFE BLASTER +2000 Reply |
http://killbuckets.com/magmod.htm Take a look at this servo demo. GD
| ||||
| Mood: |
|
camracer 23:37:15 Sat Aug 18 2012 Offline 4933 posts BBMG LIFE BLASTER +2000 Reply |
Amazing what you can do with parts from "around the house"!!!
"Tupperware" container and aluminum sheet! Very well done! I wish that guy was a Dozd Modder! But it sure gives you ideas, Huh GD! .... Nice! ---Cam
| |||||
| Mood: | Mood Now: ( Rocking ) Post Mood: ( Rocking ) |
|
green_dots 17:52:38 Sat Aug 18 2012 Online 2392 posts BBMG LIFE BLASTER +2000 Reply |
http://www.youtube.com/watch?v=CNyv2e4-jxY&feature=relmfu Kind of interesting but I am trying to find part 3. GD
| ||||
| Mood: |
|
camracer 14:20:32 Sat Aug 18 2012 Offline 4933 posts BBMG LIFE BLASTER +2000 Reply |
A nice find GD. I registered with them. I'll read through it.
---Cam
| |||||
| Mood: | Mood Now: ( Rocking ) Post Mood: ( Rocking ) |
|
green_dots 03:10:16 Sat Aug 18 2012 Online 2392 posts BBMG LIFE BLASTER +2000 Reply |
| ||||
| Mood: |
| Pages: [ 1 ] |
| [ Notify ] | [ Print ] | [ Send To Friend ] | [ Watch ] | [ < ] [ > ] |
|
| Register :: Log In The time is now 16:13:15 Thu May 23 2013 |